Firmwareupdate G9II
Verfasst: Mittwoch 20. Dezember 2023, 07:38
Guten Morgen,
es gibt ne neue FW für die G9II:
1) RAW video output over HDMI to Blackmagic Design external recorder
- [5.7K] / [C4K] / [5.8K (4:3)] / [4.4K (4:3)] 12-bit RAW video data can be output over HDMI to Blackmagic Video Assist 5" 12G HDR and Blackmagic Video Assist 7" 12G HDR, to be recorded as Blackmagic RAW.
* DaVinci Resolve or DaVinci Resolve Studio is required to play back and DaVinci Resolve Studio to edit Blackmagic RAW data.
* Please refer to the Blackmagic Design website for the information on the corresponding firmware version of Blackmagic Video Assist 5" 12G HDR and Blackmagic Video Assist 7" 12G HDR.
* All functions may not be available depending on the situation.
* When recording in C4K 120p/100p or 5.7K 60p/50p, constant bitrate 5:1 or less is recommended for SSD recording and 8:1 or less for SD card recording.
2) RAW video output over HDMI to ATOMOS external recorder
- [5.7K] / [C4K] / [5.8K (4:3)] / [4.4K (4:3)] 12-bit RAW video data can be output over HDMI to ATOMOS "Ninja V" "Ninja V+" "Ninja" "Ninja Ultra" "Shogun" "Shogun Ultra" "Shogun Connect" devices, to be recorded as Apple ProRes RAW.
* All functions may not be available depending on the situation.
* Please check here for compatible firmware versions of external recorders.
* "Ninja V" "Ninja" "Shogun" does not support some RAW video data.
* Software that supports Apple ProRes RAW is required to edit RAW video recorded.
* A LUT (Lookup table) exclusively designed for RAW video is available on the following customer support website to make the same color grading as V-Log/V-Gamut.
https://panasonic.jp/support/globa ... _raw_lut/
Others
- Operational stability when using in some storage devices has been improved.
- There were cases where horizontal lines would appear in the image when capturing JPEG photos in SH Burst Shot mode. This bug has been fixed.
- Improved operational stability.
es gibt ne neue FW für die G9II:
1) RAW video output over HDMI to Blackmagic Design external recorder
- [5.7K] / [C4K] / [5.8K (4:3)] / [4.4K (4:3)] 12-bit RAW video data can be output over HDMI to Blackmagic Video Assist 5" 12G HDR and Blackmagic Video Assist 7" 12G HDR, to be recorded as Blackmagic RAW.
* DaVinci Resolve or DaVinci Resolve Studio is required to play back and DaVinci Resolve Studio to edit Blackmagic RAW data.
* Please refer to the Blackmagic Design website for the information on the corresponding firmware version of Blackmagic Video Assist 5" 12G HDR and Blackmagic Video Assist 7" 12G HDR.
* All functions may not be available depending on the situation.
* When recording in C4K 120p/100p or 5.7K 60p/50p, constant bitrate 5:1 or less is recommended for SSD recording and 8:1 or less for SD card recording.
2) RAW video output over HDMI to ATOMOS external recorder
- [5.7K] / [C4K] / [5.8K (4:3)] / [4.4K (4:3)] 12-bit RAW video data can be output over HDMI to ATOMOS "Ninja V" "Ninja V+" "Ninja" "Ninja Ultra" "Shogun" "Shogun Ultra" "Shogun Connect" devices, to be recorded as Apple ProRes RAW.
* All functions may not be available depending on the situation.
* Please check here for compatible firmware versions of external recorders.
* "Ninja V" "Ninja" "Shogun" does not support some RAW video data.
* Software that supports Apple ProRes RAW is required to edit RAW video recorded.
* A LUT (Lookup table) exclusively designed for RAW video is available on the following customer support website to make the same color grading as V-Log/V-Gamut.
https://panasonic.jp/support/globa ... _raw_lut/
Others
- Operational stability when using in some storage devices has been improved.
- There were cases where horizontal lines would appear in the image when capturing JPEG photos in SH Burst Shot mode. This bug has been fixed.
- Improved operational stability.